BC/BL/BLR2604 Programming Guide2604 Programming guideThis document is to be used with Baracoda Barcode Scanners :BC2604BL2604BLR 2604Important notice:Every effort is made to ensure the accuracy of our product information; however, we accept no responsibility for errors oromissions including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Weshall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing,performance, or use of this material.Specifications or version may be subject to change without notice. The actual specification and version are based on theproduct delivered.INTRODUCTIONScanning a series of programming bar code labels can configure the scanner.The scanner must be properly powered before programming.During the programming mode, the scanner will acknowledge a good and valid reading with a short beep. It will givelong beeps for either an invalid or bad reading.PROGRAMMING OPTIONSProgrammable options are divided into 2 groups. The first group includes the options that show the general behaviour ofthe scanner. The second group sets the decoding parameters for each barcode symbology.SCANNING INSTRUCTIONSThe Programming Guide barcodes should be scanned with a full charged set of batteries.The BLR2604 scanning distance is 60 cm.© Baracoda 2004 Page 1/22