Baracoda D-Fly User Manual

Also see for D-Fly: Compatibility guide Specifications User guide Programming guide Programming guide

Contents

Baracoda D-Fly User Manual Manual pdf 15 page image

Baracoda D-Fly & D-Fly2– User Guide v2.4 - 15 -Data Capturefor Workforcein Motion7.4. Data formatThe data format is the following :Header Timestamp(*)CapturePrefixSymbologyPrefixBarcode SymbologySuffixCaptureSuffix(*) : timestamp feature is implemented on D-Fly2 which has for P/N value “B401202xx” ; from firmware v1.547.4.1. Baracoda HeaderIt is a proprietary data encapsulation. It is necessary to activate the Baracoda header in 2 cases:• to use the Baracoda keyboard emulation (Kemul) and Terminal.• to use the “No data loss” mode.You can configure Baracoda Header through BaracodaManager software.The Baracoda header is enabled in default settings.7.4.2. TimeStamp (*)(*) : timestamp feature is implemented on D-Fly2 which has for P/N value “B401202xx” ; from firmware v1.54Timestamp can be configured (ON/OFF, synchronise new time) by BaracodaManager and by configurationbarcodes.Timestamp will be in the following format: YYMMDDhhmmss:YY: YEAR MM: MONTH DD: DAY hh: Hours mm: Minutes ss: Seconds7.4.3. Capture Prefix / SuffixA prefix and/ or suffix can be added to every barcode sent to the host device. You can configure prefix/suffixthrough BaracodaManager software or with the Programming Guide.There is no prefix/suffix in default settings.7.4.4. Symbology Prefix / SuffixA prefix and/or suffix can be added to a specific symbology barcode sent to a host device.Meaning a certain prefix/suffix will be added while reading a specific symbology.You can configure prefix/suffix through BaracodaManager software.There is no “symbology prefix/suffix” in default settings.