                                                    | |
Contents
| 
Warnings, Installations and OperationsThis gas appliance must be installed by a qualified installer in accordance with local building codes, or in the absence oflocal codes, with the current CAN/CSA-B149.1 or .2 Installation Code (in Canada) or the current National Fuel Gas CodeZ223.1- NFPA 54 when installed in the United States.This appliance, when installed, must be electrically connected and grounded in accordance with local codes, or in theabsence of local codes, with the current CSA C22.1 Canadian Electrical Code or with the National Electrical Code;ANSI/NFPA 70 when installed in the United States.WARNINGFOR SAFE INSTALLATION AND OPERATION OF YOUR GAS FIREPLACE PLEASE NOTE THE FOLLOWING:1. when an appliance is for connection to a fixed piping system, the installation must conform with local codes or,in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1 • NFPA 54; National Fuel GasCode; Natural Gas and Propane Installation Code, CSA B149.1; or Propane Storage and Handling Code, CSAB149.2, as applicable.2. This appliance, when installed, must be electrically grounded in accordance with local codes or, in the absenceof local codes, with the National Electrical Code, ANSI/NFPA 70; or the Canadian Electrical Code, CSA C22.1,if applicable.3. THIS UNIT IS NOT FOR USE WITH SOLID FUEL.4. Always keep the appliance clear and free from combustible materials, gasoline, and other flammable vaporsand liquids.5. Inspect the fuel supply connection (including the hose for LP models) before each use of the appliance. SeeLighting Instructions for removal of Access Panel.6. If it is evident there is excessive abrasion or wear, or the hose is damaged, it must be replaced prior to theappliance being put into operation. Locate the hose out of pathways where people may trip over it or in areaswhere the hose may be subject to accidental damage7. Locate the hose out of pathways where people may trip over it or in areas where the hose may be subject toaccidental damage.8. Children and adults should be alerted to the hazards of the high surface temperatures of this appliance andshould stay away to avoid burns or ignition of clothing.9. Young children should be carefully supervised when they are in the area of the appliance.10. Clothing or other flammable material should not be placed on or near the appliance. This appliance should notbe used as a drying rack for clothing.11. Any safety screen or guard removed for servicing an appliance must be replaced prior to operating theappliance.12. Installation and repair should be done by a qualified service person. The appliance should be inspected beforeuse and at least annually by a professional service person. More frequent cleaning may be required due toexcessive lint from carpeting, et cetera. It is imperative that control compartments, burners and circulating airpassageways of the appliance be kept clean.13. Do not use this appliance if any part has been under water. Immediately call a qualified service technician toinspect the unit and to replace any part of the control system and any gas control which has been underwater.In the Commonwealth of Massachusetts, the installer or serviceagent shall be a plumber or gas fitter licensed by theCommonwealth of Massachusetts.For the State of Massachusetts, flexible connectors shall notexceed 36 inches in length.For the state of Massachusetts a T-handle gas shut-off valvemust be used on a gas appliance.2 |
Related manuals for Barbara Jean OFP4336S1
This manual is suitable for:
OFP4336S1OFP4336S2OFP5548S1OFP5548S2OFP7972S1OFP7972S2OB SeriesOB24MANOB24MAPOB24MVNOB24MVPOB36MANOB36MAPOB36MVNOB36MVPOB48MANOB48MAPOB48MVNOB48MVPOB72MVNOB72MVPOB96MVNOB96MVPOFP S1 SeriesOFP S2 SeriesOFS SeriesOFS24MANOFS24MAPOFS36MANOFS36MAPOFS48MANOFS48MAPOLTN SeriesOLTN24OLTN36OLTN48OLTW SeriesOLTW24OLTW36OLTW48
manualsdatabase
Your AI-powered manual search engine