8. Tools Menu8.4 PiP add windowWhat can be done ?It is possible to add a window to the existing windows (maximum 4), therefore a source must be selected.Sources which are already used are unselectable. If for instance the PiP layout contains a component video then component videowill be unselectable.Once added, the window may be altered in several ways to meet particular needs:• repositioning• resizing• changing the orderHow to add a window ?1. Press MENU to activate the Toolbar2. Press → to select the Tools item3. Press ↓ to Pull down the Tools menu4. Use ↑ or ↓ to select PiP add window5. Press ENTERThe source selection menu is displayed (image 8-5)In the lower part of the screen appears a wizard in 4 steps (image 8-6)Image 8-5Image 8-68.5 PiP remove windowHow to remove a window ?1. Press MENU to activate the Toolbar2. Press → to select the Tools item3. Press ↓ to Pull down the Tools menu4. Use ↑ or ↓ to select PiP remove window (image 8-7)5. Press ENTERIn the lower part of the screen appears a wizard in 4 steps. (image 8-8)The selected window appears surrounded with a white frame, each hit on PiP ADJUST will move the frame along the differentwindows.70 R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002
