Barco ClickShare CSE-800 User Manual
Also see for ClickShare CSE-800: Installation guidesInstallation manualUser guideInstallation manualHow-to
                                             | |
Contents
| 
3. Getting started3. GETTING STARTED3.1 Activating the Base UnitAbout power modeYou can power on and off the Base Unit and bring the system in standby mode. In standby mode the system mutes the output signalto the displays. If your display supports this, it will automatically enter power saving mode.Power on the Base Unit or awake it from standby1. When the Base Unit is shut down, set the rocker switch at the back of the Base Unit to “I”.1Image 3-1Power switch2. If the system does not start up automatically, push the standby button shortly.Image 3-2Standby buttonThe system is now powered on.Put the Base Unit in standby1. Push the standby button shortly image 3-2.To shut down the Base UnitThe Base Unit can be shut down in two ways :1. Push the standby button until the Base Unit shuts down image 3-2.2. Set the rocker switch at the back of the Base Unit to “0” image 3-1.R5900050 CLICKSHARE CSE-800 15/03/2017 13 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine