Barco DP2K-12C Installation Manual

Also see for DP2K--20C: Technical specifications User manual Preliminary Installation manual Safety & Environmental Information

Contents

Barco DP2K-12C Installation Manual Manual pdf 74 page image

10. Removal and installation of projector covers2. Remove the lamp cover from the projector doing the following:a) gently pull out the left bottom corner (A) of the lamp cover,b) then gently pull out the left top corner (B) of the lamp cover,c) then move the lamp cover away from the projector (C).BACImage 10-2Remove lamp cover10.2 Removal of the input coverWARNING : This procedure may only be performed by qualified technical service personnel.Necessary toolsFlat screw driver.How to remove the input cover of the projector?1. Release the two captive screws at the top and bottom left side of the input cover, using a flat screw driver.Image 10-3Release input cover2. Remove the input cover from the projector doing the following:a) gently pull out the right bottom corner (A) of the input cover,b) then gently pull out the right top corner (B) of the input cover,c) then move the input cover away from the projector (C).68 R5905050 DP2K C-SERIES 10/07/2012