7. Communicator Touch Panel7.1 IntroductionCommunicator Touch Panel for digital cinema projectorsThe Communicator Touch Panel is designed for multi-user command and control, the Communicator enables users to learn quicklyand operate efficiently - using an elegant and flexible touch panel interface. The interface’s commonality means that operatorscan intuitively use any model in the product line, without restriction, and its user-friendly nature translates directly into a short andenjoyable learning curve.Image 7-1Flexible touch panel interfaceThe touch panel interface can be mounted upon a swivel arm which easily fits on top of the DP2K-23B projector. One central lockingmechanism of the swivel arm allows an instant fixation of the touch panel interface in any position.The touch panel interface can also be installed further away from the DP2K-23B projector. For that you can use a serial (RS232)cable up to 10 meter or an Ethernet cable up to 50 meter to allow a direct data communication between the DP2K-23B projector andthe Communicator Touch Panel.The touch panel interface can also be connected with a Local Area Network (LAN) just like the DP2K-23B projector. In this caseboth devices can communicate with each other as well.The touch panel interface requires a +12 VDC voltage, 1,5 ampere. The use of a separate +12 VDC adaptor (1,5 ampere minimum)is required.Parts location of the touch panel interfaceABC D E F G HImage 7-2Communicator touch panelA Touch screenB Communication panelC Knob to operate central swivel clampD Base of swivel armE Power input 12 VDC, 1.5AF RS232 port (sub-D)G Ethernet port (RJ45)68 R59770495 DP2K-23B 30/04/2010
