2. Safety2.1 General considerationsGeneral safety instructions• Before operating this equipment please read this manual thoroughly and retain it for future reference.• Installation and preliminary adjustments should be performed by qualified Barco personnel or by authorized Barco service deal-ers.• All warnings on the projector and in the documentation manuals should be adhered to.• All instructions for operating and use of this equipment must be followed precisely.• All local installation codes should be adhered to.Notice on electrical safetyThis equipment is built in accordance with the requirements of the international safety standards IEC60950-1, EN60950-1,UL60950-1 and CAN/CSA C22.2 No.60950-1, which are the safety standards of information technology equipment includingelectrical business equipment. These safety standards impose important requirements on the use of safety critical components,materials and insulation, in order to protect the user or operator against risk of electric shock and energy hazard and having accessto live parts. Safety standards also impose limits to the internal and external temperature rises, radiation levels, mechanical stabilityand strength, enclosure construction and protection against the risk of fire. Simulated single fault condition testing ensures thesafety of the equipment to the user even when the equipment’s normal operation fails.Users definitionThroughout this manual, the terms SERVICE PERSONNEL and TRAINED PROJECTIONIST refers to persons having appropriatetechnical training and experience necessary to be knowledgeable of potential hazards to which they are exposed (including, but notlimited to HIGH VOLTAGE ELECTRIC and ELECTRONIC CIRCUITRY and HIGH BRIGHTNESS PROJECTORS) in performing atask, and of measures to minimize the potential risk to themselves or other persons. The term USER and OPERATOR refers toany person other than SERVICE PERSONNEL or TRAINED PROJECTIONISTS, AUTHORIZED to operate professional projectionsystems.The TRAINED PROJECTIONISTS may only perform the maintenance task described in the User & Installation manual. All othermaintenance tasks and service tasks must be performed by qualified SERVICE PERSONNEL.The DLP Cinema Systems are intended "FOR PROFESSIONAL USE ONLY" by AUTHORIZED PERSONNEL familiar with potentialhazards associated with high voltage, high intensity light beams, ultraviolet exposure and high temperatures generated by the lampand associated circuits. Only qualified SERVICE PERSONNEL and TRAINED PROJECTIONISTS, knowledgeable of such risks,are allowed to perform service functions inside the product enclosure.Owner’s recordThe part number and serial number are printed on a label which is stuck on the respective part. Record these numbers in the spacesprovided below. Refer to them whenever you call upon your Barco dealer regarding this product.Product article numberProduct serial numberDealer6 R5906693 DP2K-E SERIES 19/06/2015
