Barco MDSC-8255 User Manual

Also see for MDSC-8231: User guide User guide

Barco MDSC-8255 User Manual Manual pdf 38 page image

K5902133 (451920612483)-02 MDSC-8255385.3.9 Picture in Picture transparencyAbout Picture in Picture transparencyThe available Picture in Picture transparencies range selectable for your display is between:• 0: No transparency• 10: Maximum transparency (roughly 37%)To select Picture in Picture mode1. Bring up the OSD main menu.2. Navigate to the Input Select menu.3. Enter the PiP transparency submenu.4. Select one of the required PiP transparency value and confirm.5.4 Configuration menu5.4.1 InformationAbout informationThe available information items for your display are:• Model (commercial type identification)• SW package (display firmware identification)• Main board release (hardware and firmware identification)• MNA release (firmware identification)• Eth1 Main (IP address of Main ethernet (1) port of the monitor)• Eth2 2nd (IP address of 2nd ethernet (2) port of the monitor)• Keyboard release (hardware and firmware identification)• SDI module release (hardware and firmware identification)• Serial Number (unit serial number)• Main FPGA release (firmware identification)To access information1. Bring up the OSD main menu.2. Navigate to the Configuration menu.3. Enter the Information submenu.5.4.2 LanguageAbout languagesThe available languages for your display OSD menu are:• English• Français• Deutsch• Español• ItalianoTo select the language1. Bring up the OSD main menu.2. Navigate to the Configuration menu.3. Enter the Language submenu.4. Select one of the available languages and confirm.Advanced operation