Barco MXRT-1450 User Manual

Also see for MXRT-1450: User guide User guide

Barco MXRT-1450 User Manual Manual pdf 37 page image

5. Driver and software featuresTouchpad gesture Emulated Mouse actionDrag two fingers up Scroll wheel upDrag two fingers down Scroll wheel downDrag two fingers left Click scroll Wheel and drag leftDrag two fingers right Click scroll Wheel and drag rightUsing the Barco Touchpad Gesture RecognitionThe Barco Touchpad recognizes ten two- and three-finger gestures: Two- and Three-finger Swipe Left,Two- and Three-finger Swipe Right, Two- and Three-finger Swipe Up, Two- and Three-finger Swipe Down,Two-finger Pinch In, and Two-finger Pinch Out. These are shown in the table below.Swipe Left Swipe RightSwipe Up Swipe DownPinch In Pinch OutEach gesture can be programmed to send keystroke shortcuts, as if those keys were pressed on thekeyboard. The gesture can send a single keystroke or send the keystroke continuously until the gestureceases. Some gestures are used by default in Mouse Emulation Mode; those defaults can be overwrittenin the Barco System Settings Control Panel.5.14.3 ConfigurationConfiguring the Barco TouchpadFrom the Barco System Settings Control Panel, navigate to the Touchpad Gestures section to associatethe Barco Touchpad gestures with desired shortcut keys.• Enable Mouse Emulation: Click on this checkbox to control the cursor with the touchpad.• Speed: This slides controls the responsiveness of the cursor in Mouse Emulation Mode.• Emitted Shortcut: This field shows the currently defined keyboard shortcut for each gesture. Clickon the field to define a new shortcut.• Clear: Click the Clear button to remove the hotkey for a given gesture or button.• Continuous: This checkbox enables continuous shortcut emission.• Rate: This slide controls the rate of continuous shortcut emission.• Shortcut Description: Click on this free text field to describe the intention of the shortcut.5.15 VirtualView5.15.1 DescriptionOverviewVirtualView gives the user additional real-estate on the screen by creating a virtual display in Windowswithout the need for an additional physical display on the desk. A virtual display is created for the user touse as a navigational head, or for other software, such as dictation. The user can set the location of theK5905271 DISPLAY CONTROLLER 27/02/2017 35