Bard WA611 Installation Instructions Manual

Also see for WA611: Installation instructions

Contents

Bard WA611 Installation Instructions Manual Manual pdf 10 page image

Manual 2100-425Page 8FIGURE 3MOUNTING INSTRUCTIONSThe unit rating plate lists a “Maximum Time DelayRelay Fuse” or “HACR" type circuit breaker that is tobe used with the equipment. The correct size must beused for proper circuit protection and also to assurethat there will be no nuisance tripping due to themomentary high starting current of the compressormotor.The disconnect access door on this unit may be lockedto prevent unauthorized access to the disconnect. Toconvert for the locking capability, bend the tab locatedin the bottom left hand corner of the disconnectopening under the disconnect access panel straightout. This tab will now line up with the slot in the door.When shut, a padlock may be placed through the holein the tab preventing entry.See Start-up section for information on three phasescroll compressor start-ups.MIS-796NOTE: It is recommended that a bead of siliconecaulking be placed behind the side mountingflanges and under the top flashing at thetime of installation.