Barnett Engineering Pro Talk ARU CV2 Instruction Manual
Also see for PRO TALK CV2: Instruction manual
                                            | |
Contents
| 
Configuration using the PC 3-17B1272M001 BARNETT ENGINEERING LTD. ProTalk Cv2SignalIf a DTMF tag is programmed for a point and the Signal command is set, then only theDTMF tag for this point will be sent and the voice message will not be spoken.Signal must be preceded by a Dial command; it cannot be the first entry in the list. It canbe used once in a list.DeleteDelete removes the selected command from the list. Commands that followed the deletedone are moved to fill in the empty space. If the first command is selected, then Delete willremove all commands for this line.3.5.5 GeneralSettings that affect the overall operation of the Cv2 are entered in the General section.Site NameThe Site Name is a 16 character text field that allows you to enter a description of the sitewhere the Cv2 is to be located. Other than viewing in the General dialog box, this namehas no other use. Normally it is set to match the voice message that is programmed as theSite Identifier.Default Site Name: an empty text string.Security LevelThe Security level setting determines the actions that the Cv2 will perform when it receivesan incoming call.Level 1 The Cv2 announces the Site ID, any groups that are in the alarm stateand prompts the caller to “Enter Command Code”.Level 2 When the incoming call is answered by the Cv2, only the Site ID isannounced; for further access to the Cv2 the caller must enter theAccess Code.Level 3 An incoming call results in the Cv2 coming off-hook with noannouncement; the Access Code must be entered within ten seconds orthe Cv2 will hang up.Default Security Level: Level 1Access CodeIf you plan to use the remote programming features where changes are madeby calling the unit from a remote phone, an access code must be programmed.For remote programming, all security levels require the Access code. For localprogramming, the Access code must be entered if the unit has this code. Local |
Related manuals for Barnett Engineering PRO TALK CV2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine