Baroness LM180C Owner's Operating Manual

Also see for LM180C: Owner's manual Owner's operating manual Owner's operating manual

Contents

Baroness LM180C Owner's Operating Manual Manual pdf 45 page image

Make sure that the brake is applied properlywhen you pull the parking brake lever, andthat there is no brake dragging when yourelease the parking brake lever.1445233ulabms-002Adjustment of Parking Brake_0011 Parking brake lever2 Brake wire3 Nut4 Wire adjustment metal fitting5 Brake drumNote:You can also adjust the brake wire on thetransmission side.Adjustment of BrakeIf the brake is not applied effectively even if youdepress the pedal up to the stopper, adjust thebrake rod.Pull the parking brake lever completely andmake sure that the brake is effectivelyapplied.Loosen the lock nut.Remove the cotter pin, washer and pin thataffix the brake pedal to the front of the brakerod.5.1.2.3.Screw in the nut on the front of the brakerod, then temporarily affix the brake pedal tothe front of the brake rod using the pin.Depress the brake pedal lightly, and adjustthe clearance between the pedal stopperand brake pedal to 5-7mm.(If the clearanceis larger than 7mm, the brake may bedamaged.)Affix the brake pedal to the front of the brakerod securely using the pin.Tighten the lock nut to secure the front of thebrake rod firmly.Make sure that the brake is not applied anylonger when you release the brake pedal.372165 - 7 mm45nfzln9-001Adjustment of Brake_0011 Brake pedal2 Pedal stopper3 Parking brake lever4 Lock nut5 Brake rod (front)6 Cotter pin, washer, pin7 Brake drum4.5.6.7.8.MaintenanceLM180CMaintenancePage 5-13Maintenance (Main Body)