Baroness LM18GB Owner's Operating Manual
                                                                                 | |
Principal tightening torquesTightening Torque by ModelLM18GB/LM56GB/LM66GB/LM66TBTighten the following bolts and nuts at the torque specified in the table.For thread locking adhesive, apply a middle strength thread locker (ThreeBond 1322 anaerobicadhesives).Location Code Part name Tightening torque Thread lockingadhesiveN-m kgf-cm lb-inBedknife K0071000222 SCREW, HT FLAT HEADM6-12 7 - 9 71.38 - 91.77 61.96 - 79.66 -Reel shaft K0185160002 NUT, LEFT-HANDED P1.5M16-3 36 367.09 318.64 -Reel shaft(Groomer model) LM56G--1204Z0 GEAR, 20-TEETH 36 367.09 318.64 -Front roller K6083000042 PIN, STEPPED M15-19 29 - 38 295.71 - 387.49 256.68 - 336.34 -Drum wheel K0024080251 BOLT, WITH HEX. HOLEM8-25 To keep the fitting from coming off -Handle K0010100252 BOLT, HT M10-25 29 - 38 295.71 - 387.49 256.68 - 336.34 -GroomerK0160000602 NUT, SPECIAL P1 M17WITH M4 5 - 10 50.99 - 101.97 44.26 - 88.51 -K6083000143 PIN, STEPPED FORFIXING (R) CASE 6 61.18 53.11 -Handling InstructionsLM18GB・LM56GB/LM66TBHandling InstructionsPage 5-11Tightening torques |
Related manuals for Baroness LM18GB
Baroness LM18GC Owner's Operating Manual
Baroness LM180C Owner's Operating Manual
Baroness LM180C Owner's Operating Manual
Baroness LM180E Owner's Operating Manual
Baroness LM180C Owner's Operating Manual
Baroness LM101 Owner's Operating Manual
Baroness LM101 Owner's Operating Manual
Baroness LM101 Owner's Operating Manual
Baroness LM56GB Owner's Operating Manual
Baroness LM285 Owner's Operating Manual
manualsdatabase
Your AI-powered manual search engine