Baroness LM331 Owner's Operating Manual

Also see for LM331: Service manual Owner's operating manual Owner's operating manual

Baroness LM331 Owner's Operating Manual Manual pdf 51 page image

Proximity SensorThere is a proximity sensor on #2 mower armfulcrum.This sensor detects the raised or loweredpositions of mower unit #2. The information isrelated to controlling rotation and stop of thereel cutter (cutting cylinder).1qeetgd-018Proximity Sensor_0011 Proximity sensor2WD/3WD Selector LeverCautionBefore switching between 2WD and 3WDoperation, make sure that the machine iscompletely stopped.CautionSince traveling on steep downward slopes,wet surfaces and wet grassy downwardslopes in 3WD is dangerous, use 2WD.Otherwise, the rear tires may slip and travelcontrol may be lost.The 2WD/3WD selector lever is located to theleft of the driver's seat.When the lever is shifted forward, 3WD modeis selected. When the lever is shiftedbackward, 2WD mode is selected.AB2WD 3WD19hc94o-0012WD/3WD Selector Lever_0011 2WD/3WD selector leverA 3WDB 2WDLight SwitchWarningThe lights provide auxiliary lighting.Do not travel or operate the machine at nightor under poor visibility.Note:Depending on the specifications, this functionmay not be available.The light switch is located in the meter panel.When the switch is set to the "ON" position, thelights turn on. When it is set to the "OFF"position, the lights turn off.AB1bnec97-021Light Switch_0011 Light switchA ONB OFFNote:The lights will not turn on when the key switchis set to the "OFF" position.Handling InstructionsLM331Handling InstructionsPage 4-25Operation of Each Section