Baroness LM551 Owner's Operating Manual

Also see for LM551: Owner's operating manual Service manual

Contents

Baroness LM551 Owner's Operating Manual Manual pdf 53 page image

Light SwitchCautionThe lights provide auxiliary lighting.Do not travel or operate the machine at nightor under poor visibility.The light switch is located in the operationpanel.When the switch is set to the "ON" position, thelights turn on. When it is set to the "OFF"position, the lights turn off.1A Bbnec97-024Light Switch_0011 Light switchA Turn onB Turn offTraveling/Working Selector SwitchThe traveling/working selector switch is locatedin the operation panel.This can change the positions where mowerunits #4 and #5 stop when they are raised.A B1ufahas-003Traveling/Working Selector Switch_0011 Traveling/working selector switchA WorkingB TravelingWhen the switch is set to the "Traveling"position, mower units #4 and #5 are raised totheir highest positions.When the switch is set to the "Working"position, mower units #4 and #5 are only raisedhalfway.When set to the "Traveling" positionufahas-004Traveling/Working Selector Switch_002When set to the "Working" positionufahas-005Traveling/Working Selector Switch_003Reel Rotation SwitchCautionSet the reel rotation switch to the "Rotation"position immediately before starting cuttingwork. At all other times, be sure to leave thereel rotation switch set to the "Stop" position.The reel rotation switch is located in theoperation panel and operates rotation of thereel cutters (cutting cylinders) of the mowerunits.When the reel rotation switch is set to the"Rotation" position, the reel cutters (cuttingcylinders) of all mower units will rotate forcutting work. When the reel rotation switch isset to the "Stop" position, the reel cutters(cutting cylinders) will stop.Handling InstructionsLM551Handling InstructionsPage 4-29Operation of Each Section