Baroness SP05 Owner's Operating Manual
Also see for SP05: Service manualAssembly and installation manualAssembly and installation manualOwner's operating manual
                                        | |
Contents
| 
25● Before adjusting the belt tension, be sure to stop theengine.● Before installing the belt, remove the high nut to loosenthe belt tension completely. In doing this, be carefulnot to get your fingers caught between the belt and thepulley.Belt Spring coverSpringTension pulleyPump pulleyEngine pulleyTension supportTighten until there is no gap. NutHigh nut● The muffler of the engine is near the belt. Make sure thatthe muffler has cooled sufficiently before adjusting thebelt tension.6-5 Adjustment of the belt tension● To adjust the belt tension, tighten the high nut until no gap remainsbetween the spring cover and the tension support, then lock it in placewith the nut. If the tension is loosened by use of the machine, a gapwill appear. If this happens, readjust the belt tension.Spring rod Brake leverBrake pedalBrake wireAdjuster boltNut Rearwheel6-4 Adjustment of the brakeAdjust the brake by tightening the brake wire adjuster bolts and thespring rod.1. Adjustment of the brake wire adjuster bolts● Adjust the pull length for the brake lever by adjusting the brake wireadjuster bolts. Adjust it so that the brake lever has as little play aspossible and the brake does not make any noise when it is released.○ If the brake lever has a lot of play .............The brake force is weakenedand the brake pedal becomes lighter.○ If the brake lever has only a little play .......The brake force is increasedand the brake pedal becomes heavier.2. Adjustment of the spring rod● The brake force and the operating force of the brake pedal can beadjusted by adjusting the nut on the spring rod.○ If the nut is loosen ........... The brake force is weakened and the brakepedal becomes lighter.○ If the nut is tightened ....... The brake force is increased and the brakepedal becomes heavier.○ After the appropriate adjustment has been completed, tighten the locknut securely. |
Related manuals for Baroness SP05
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine