Travel of MachineOperating ProcedureStart the engine.((See "Procedure to StartEngine" (Page 4-20) .)Raise the rake.Firmly depress the brake pedal and releasethe lock fitting to release the brake pedal.Slowly depress the traveling pedal.The machine can start traveling.Towing the MachineIf the machine does not travel due to enginetrouble, etc., you can move it by towing it.CautionTow the machine at a low speed while payingclose attention.CautionDo not touch the unload valve except whentowing the machine.CautionBefore restarting the engine, be sure to closethe unload valve.Stop the engine.((See "Procedure to StopEngine" (Page 4-20) .)Apply the parking brake and chock thewheels.Release the cover fastener.Open the rear cover, and then lift it until thegas spring is fully extended.1.2.3.4.5.1.2.3.4.Loosen the lock nuts.1234gay3t1-003Towing the Machine_0011 Piston pump2 Unload valve operating pins3 Bolt4 Lock nutCautionWhen pushing in the unload valve operatingpins, be careful about overtightening thebolts.The unload valve operating pins may bedamaged.Tighten the bolts, and then push in theunload valve operating pins to open theunload valve.1234gay3t1-003Towing the Machine_0021 Piston pump2 Unload valve operating pins3 Bolt4 Lock nut5.6.SP05AHandling InstructionsPage 4-26 Travel of Machine