Barracuda SSL VPN V Series Manual
                                                                                                | |
Contents
| 
1.2.3.4.1.2.3.4.1.2.3.Barracuda SSL VPN.Step 2. (optional) Install the Client Configuration FileTo run the Network Connector in stand-alone mode, without having to log in through the web interface, you must download and install a clientconfiguration file onto the remote system.To install the client configuration file on your system:Log in to SSL VPN web interface.Go to the page.RESOURCES > My Network ConnectorLocate the client configuration in the section and clickMy Network Connector More.Select .Install Client Configuration fileStep 3. Launch the Network Connector ClientOnce the Client Configuration file is installed, launch the Network Connector client in stand-alone mode:Start the program. A red network icon will appear in your System Tray.Network Connector GUIRight-click on that icon and select .ConnectEnter your authentication information, and click OK.The icon will flash while attempting to establish a connection, and will turn green when a secure connection to the protected network is inplace and ready for use.Using the Network Connector with Mac OS XFollow these instructions to install the network connector on your Mac:In this article:Step 1. Install the Mac ClientStep 2. Install the Client Configuration FileStep 3. Launch the Network Connector ClientStep 1. Install the Mac ClientOpen the page.RESOURCES > My Network ConnectorClick the button. You will be prompted to either orDownload Mac Client Runthe installer ( ).Save .dmg fileLaunch the installer once the installation package downloads, and select alldefault settings as you continue through the installation.Once installed, the Network Connector is ready for use by any user on the remotesystem who is logged in through the web interface of the Barracuda SSL VPN.Related ArticlesNetwork ConnectorUsing the Network Connector withLinuxUsing the Network Connector withMicrosoft WindowsThis file is only required for stand-alone mode.When installing the configuration file, you may be presented with various warnings depending on the security level that isconfigured on your system. Accept the warnings as they appear in order to continue with the installation.Due to restrictions imposed by Windows networking, the VPN routes are not instantly published when the Network Connector islaunched. Expect to wait around 10-15 seconds after launching the client before the routes are published and the Network Connectorclient is fully usable. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine