Barrier Systems X-TENSION XTGTSS1 Installation And Maintenance Manual
                                        | |
Lindsay Transportation Solutions Sales and Services, Inc (888) 800-3691 [U.S. toll free] or +1 (707) 374-68008INsTALLATIoN ANd MAINTENANCE MANUALX-Tension - Tangent Installation InstructionsAtPost 7AtPost 5AtPost 3AtPost 1Step 1 - Set OutThe tangent terminal is essentially an 11.4m (38 ft) continuation of the standard guardrail run.Pull a string line out with the desired offset (0 -450mm : 0-1.5 ft) over the length of the system, ina straight flare (Figure 1). The system should not be installed on parabolic curve. The stringline should be set to follow the roadside edge of the posts.All the posts except post #1 have a blockout so take care to place the roadside face ofpost #1 200mm (8 in) towards the roadway to compensate for the lack of blockout. |
manualsdatabase
Your AI-powered manual search engine