Bartec Agile X IS User Manual

Also see for Agile X IS: Installation instruction Faq Update guide Frequently asked questions Installation manual

Contents

Bartec Agile X IS User Manual Manual pdf 38 page image

Operation Industry Tablet PC 10.1" Agile X ISType 17-A1B*-****/********EN 32/43 Subject to technical changes.05/20177.3.8 Equipping laser devicesLaser warning noteNotice no. 50 dated June 24th, 2007 and EN60825-1: 2007 and IEC60825-1 (ed. 2.0).The laser classification is specified on a sticker attached to the device.Class 2 laser scanners use a low-power laser diode with visible light. As is the casewith any bright light source, such as the sun, always avoid looking directly into the lightbeam. No information is available regarding the potential dangers of being exposed toclass 2 laser light for a brief period.Caution: The use of control elements which change settings or initiate procedures thatare not mentioned here can lead to a situation in which persons are exposed tohazardous laser beams.7.3.9 LED unitsCAUTIONLaser radiation! May damage eyesight! Do not look into the laser beam.Devices supplied by BARTEC with LED light comply with the following directive:− EN 60079-28 for LED safety7.3.10 Restrictions in the case of wireless devicesThe use of wireless devices is possibly forbidden or restricted. This appliesprimarily on board aircraft, in hospitals, in the vicinity of explosive substances orunder other hazardous conditions. If you are not sure which regulations apply tothe use of the device, ask permission before switching it on.Radio modules The device contains radio modules. The identification data for these modules areprovided below:− Radio module from BARTEC which supportsWLAN 802.11 a/b/g/n/ac andBluetooth.Bluetooth®radio technologyThis is an authorized Bluetooth® product. Further information and an end product list isprovided at https://www.bluetooth.org/tpg/listings.cfm.Country-specific roaming This device has the International Roaming function (IEEE802.11d) which ensures thatthe device is used on the channels prescribed for the respective country.Ad-hoc operation The ad-hoc operation is restricted to the channels 36–48 (5150–5250 MHz). The use ofthis bandwidth is restricted to indoor areas; use outdoors is not permitted.