Bartec Lumen X4 User Manual

Also see for LUMEN X4: Quick start guide

Contents

Bartec Lumen X4 User Manual Manual pdf 61 page image

4.3" Industry Mobile Computer - Lumen X4Type B7-A2P4-.…/…….. OperationSubject to technical changes.03/2016 EN 55/706.10 Use the cameraThe Industry Mobile Computer is equipped with a 8 MP camera on the rear side and a2 MP camera on the front side, which the user can use to capture photos or video.Make sure that the protective lens cover is clean before taking pictures. A dirty lenscover can cause blurry pictures.6.10.1 Open the cameraWork steps:Tap the Launcher and then tap Camera . The camera opens in portrait mode, readyto take a picture or to shoot a video.6.10.2 Take a pictureWork steps:1. Adjust the exposure, flash, and other necessary settings. Or leave it automatic.2. Frame your subject / object on screen.To change the zoom factor, drag the zoom slider.3. Tap the On Screen Shutter icon (a).The camera brings the image into focus. When the image is in focus, the focusindicators in each corner will turn green (b) and the picture is ready to capture.Tap to change camera settings.Switch between front and rear cameraThe Industry Mobile Computer has both a front and rear camera. The user can selectwhich camera you want to preview and take pictures with.Not all features (such as flash) are available for the front camera.Work steps:Tap the On Screen Select Camera icon to switch between the rear camera and thefront camera. The preview switches to show the scene viewed from the camera the userselected.View picturesAfter taking a photo, a thumbnail of the picture is shown on the corner of the capturescreen.Work steps:Tap the thumbnail to view the picture. The following options are available: