- 38 -5. Installation5.1 Positioning Unpack the device and remove all package materials according to the validenvironment protection regulations.CAUTION!Never remove the rating plate and any warning signs from the device. Place the device on top of an even, stable, dry, and water-resistant surface whichsupports the weight of the device and is not heat sensitive. Never place the device on a flammable surface. Do not place the device near an open flame, electric oven or other source of heat. Never place the device in humid or wet environment. Do not block or cover the ventilation ducts that allow for air to circulate around thedevice. Doing so may lead to overheating of the device. Keep a distance of at least 5 – 10 cm from flammable walls and other objects. Do not place the induction plate near other equipment and objects sensitive tomagnetic fields (e.g. radio, television, etc.). Position the device so that fast disconnection from the power supply is possible whennecessary.5.2 Electric connectionDANGER! Electric shock hazard!The device can cause injuries due to improper installation!Before installation the local power grid specification should be compared withthat of the device (see type label). Connect the device only in case ofcompliance!CAUTION!Electrical connection may be performed only by the qualified, certifiedelectrician, according to the valid international, national and nationalregulations of the country in which the installation is performed.