Bartscher 70 Series Manual

Also see for 70 Series: Installation, use and maintenance Installation, use and maintenance Installation, use and maintenance Manual Installation, use and maintenance

Contents

Bartscher 70 Series Manual Manual pdf 39 page image

Pag. 87/118INSTRUCTIONS FOR USEOpen rings (fig. 41 – p. 14)In order to light the burners of the open rings, proceed in the following way:- Turn the knob (1) from off  position to the position ;- Push down to the bottom;- Light the pilot burner using a match or another lighter suitable for this use;- Once lit, keep the knob pressed down until the thermocouple heats up, keeping the pilot lit;- Light the main burner in the desired position, going from maximum to minimum .In order to put out the main burner, the knob has to be turned to the right into the on position; asfor putting out also the pilot, turn the knob again into the off position .Oven and maxi oven (fig. 42 – p. 15)In order to light the oven burner, proceed in the following way:- Open the oven door and turn the knob (1) from the off position  into the position ;- Press down the button;- Push the button of the piezoelectric lighter (2) to light the pilot burner;- Keep the knob pressed down until the thermocouple heats up, keeping the pilot lit; this can bechecked through the hole in the bottom of the oven;- Light the main burner, positioning the knob in one of the possible positions. Choose theposition most suited to the desired type of cooking, considering that every position correspondsindicatively to the temperatures shown below:Oven with tapPosition (N°) 1 2 3 4 5 6 7 8Temperature (°C) 140 160 180 205 235 260 280 300Oven with valvePosition (N°) 1 2 3 4 5 6 7Temperature (°C) 60 100 140 180 220 260 300In order to put out the main burner, the knob has to be turned to the right into the on position ; asfor putting out also the pilot, turn the knob again into the off position. .All hotplate (fig. 43 – p. 15)In order to light the burner of the all hotplate, proceed in the following way:- Turn the knob (1) from the off position  into the position ;- Push down to the bottom;- Press the button of the piezoelectric lighter (2) to light the pilot burner;- Keep the knob pressed down until the thermocouple heats uo, keeping the pilot lit;- Light the main burner in the desired, going from maximum to minimum .In order to put out the main burner, the knob has to be turned to the right into the position ;as for putting out also the pilot, turn the knob again, into the off position .