Bartscher A120455 Instruction Manual

Contents

Bartscher A120455 Instruction Manual Manual pdf 21 page image

- 20 -5. Installation and operation5.1 Safety instructions• Never allow the power cable to come into contact with heat sources or sharp edges.The power cable should not hang over the side of the working surface. Ensure thatno one can step on or trip over the cable.• The power cable must not be folded, bent or tangled, and must always remain fullyunrolled.• Never place the device or other objects on the power cable.• Do not lay the cable over carpets or heat insulations. Do not cover the cable.Keep away the cable from operating range and do not dunk it into water.• Do not use the device in case it does not function properly, has been damaged ordropped.• Do not use any accessory or spare parts that have not been recommended by themanufacturer. These can be dangerous for the user or lead to damages of thedevice or personal injury, and further, the warranty expires.• Do not move or tilt the device when in operation.• Never use the device with wet or moist hands.• Never leave the device unattended when in use.5.2 Installation and connection• Unpack the device and remove all packing material.• Put the device in a safe place that can support its weight and is not heat sensitive.• Never place the device on an inflammable surface.• Do not place the device near an open flame, electric heater or other heat source.• When positioning the device, keep at least a 10 cm distance from walls or other items.WARNING! Hazard via electrical current!The device can cause injuries due to improper installation!Before installation the local power grid specification should be compared withthat of the device (see type label).Connect the device only in case of compliance!The device must only be connected to a properly installed single socket withprotective contact.Never remove the power cable by pulling the cable itself; always grab the plughousing.