- 28 -ConnectionDANGER! Electric shock hazard!The device can cause injuries due to improper installation!Before installation and connecting the local power gridspecification should be compared with that of the device (seerating plate). Connect the device only in case of compliance!Connect the device only to properly installed single socketwith protective terminal.• The electrical circuit in the socket must be secured to at least 16A. Only connect thedevice directly to the wall socket; do not use any extension cords or power strips.5.2 Operation• Before use, clean the device according to the instructions set out in point 6“Cleaning”.• Before use, for device code-no. A120466, make sure the drain taps are closed asshow in the photo below. The drain taps are equipped with the drain safety lock thatprevents them from unintentional opening. When the tap is closed the safety lockshould be located before the drain tap lever.NOTE!For the device code-no. A120466, the containers may be controlled separatelyby the control elements.• Insert the grate at the bottom of the container and place the desired number ofsausages on it.• Pour in the desired amount of water. Take into account the “MIN” and “MAX”marks in the container.Drain pipeDrain safety lockDrain tap lever