- 31 -ConnectionDANGER! Electric shock hazard!The device can cause injuries due to improper installation!Before installation and connecting the local power gridspecification should be compared with that of the device(see rating plate). Connect the device only in case ofcompliance! The power supply circuit with the socket must be protected by the fuse of at least 16A.Connect the device directly to a single grounded socket. Do not use any power bar ormultiple socket. Place the unit so that the plug is easily accessible and can be quickly removed fromits socket in case of necessity.5.2 OperationStarting / SettingsWARNING! Health hazard due to smoke!Due to the food residues, there may appear some smokewhen grilling.During the first use, do not place any food products inthe device and make sure that the place of installation iswell ventilated. Before the first use, clean the device thoroughly according to the instructionsincluded in section 6 „Cleaning and maintenance“. Dry the device thoroughly. Install the grease collection tray in the device and make sure that the device is usedonly with the mounted grease connection tray to avoid damaging the device orsoiling. Close the device using the service handle. Connect the device to the single grounded socket. Set the ON/OFF switch to „I“ position to switch the device on. The device is ready towork, the green control light embedded in the ON/OFF switch comes on.