10When your press 20M, the trolley will run 20 Meters/Yards and stop by itself.When your press 30M, the trolley will run 30 Meters/Yards and stop by itself.Rheostat Control: Speed can be seamlessly controlled manually via the round rheostat controlon the right side of the handle. Dial clockwise to get the caddy in motion and increase speed tothe desired walking speed. Dial counterclockwise to decrease speed and stop the caddy.Cruise Control and Brake/Stop Function; to stop the caddy press the CruiseControl/Stop button. Once you are ready to go again, press the button shortly, and the cart willremember its last setting before you stopped and travel at the same speed automatically. Youcan now change the speed again with the rheostat speed knob. NOTE: this button does notstart the caddy without it having been in motion before. It functions more like a cruise controlmechanism. To initially bring the caddy into motion please always use the rheostat speedcontrol.Additional FunctionsFreewheeling Mode; the caddy can be easily operated without power. In order toactivate the freewheeling mode, turn main power Off. The caddy now can be pushedmanually without resistance. (The freewheeling mode on some older models can also beactivated by pulling out both rear wheels by 1/2 inch (1cm) and relocking them backinto the second axle groove. Some models are equipped with both options.)Tracking Adjustment; tracking behavior of all electric caddies is strongly dependent onequal weight distribution and slope. Test your caddy’s tracking behavior by operating iton an even surface without the bag. If changes are necessary, you can adjust the trackingof your caddy by loosening the front wheel axle and the adjustment bar on the right sideof the front wheel and shifting the axle accordingly. After adjustment, fasten screws inreverse order. Note: Don’t over tighten the nuts.