Batavia MAXX Series Operating Instructions Manual
Also see for MAXX Series: Operating instructionsOperating instructionsOperating instructionsOperating instructionsOperating instructions
                                  | |
Contents
| 
English6d. Remove any adjusting key or wrenchbefore turning the power tool on. Awrench or a key left attached to a rotat-ing part of the power tool may result inpersonal injury.e. Do not overreach. Keep proper footingand balance at all times. This enablesbetter control of the power tool in unex-pected situations.f. Dress properly. Do not wear looseclothing or jewellery. Keep your hair,clothing and gloves away from movingparts. Loose clothes, jewellery or longhair can be caught in moving parts.g. If devices are provided for the connec-tion of dust extraction and collectionfacilities, ensure these are connectedand properly used. The use of thesepieces of equipment reduce hazardscaused by dust.2.4 Power tool use and carea. Do not force the power tool. Use thecorrect power tool for your applica-tion. The correct power tool will do thejob better and safer at the rate for whichit was designed.b. Do not use the power tool if the switchdoes not turn it on and off. Any powertool that cannot be controlled with theswitch is dangerous and must berepaired.c. Store idle power tools out of the reachof children and do not allow personsunfamiliar with the power tool or theseinstructions to operate the power tool.Power tools are dangerous in the handsof untrained users.d. Maintain power tools. Check for mis-alignment or binding of moving parts,breakage of parts and any other condi-tion that may affect the power toolsoperation. If damaged, have the powertool repaired before use. Many acci-dents are caused by poorly maintainedpower tools.e. Use the power tool, accessories andtool bits etc., in accordance with theseinstructions and in the mannerintended for the particular type ofpower tool, taking into account theworking conditions and the work to beperformed. Use of the power tool foroperations different from intendedcould result in a hazardous situation.2.5 Servicea. Please use a qualified expert who usesoriginal replacement parts to repairyour power tool. This will ensure properfunctioning of the power tool.3. Additional safety warningsPlease read this manual carefullyand use the unit only according tothis manual.• Persons and animals must not stand inthe water during operation of the pump!• Attention! Pollution of the liquid couldoccur due to leakage of lubricants.• The pump has been designed for pump-ing clear water. The pump is notintended for delivering salt water, corro-sive, easily flammable or explosiveliquids (e.g. petrol, paraffin, thinners),faeces, oil, heating oil or foodstuffs.• Do not use the pump to deliver solids.Gravel, sand or the like may damage thepump.• Make sure that the temperature of thewater to be delivered must not exceed35° C.• Do not operate the pump unsupervisedfor long time.• Do not replace the cord and do notrepair it. It is not allowed to modify thecord by installing a switch or similar.• Do not pinch or crimp the cord in anyway. Keep the cord away• Do not use the cord to carry or trans-port the pump.• If not in use, do not hang up the pumpon its cord.• Protect the pump from frost.• Do not allow the pump to run dry. Dur-ing operation always keep the pumpcompletely immersed in water.• Remove the battery from the pump ifyou clean or do not use it for a longperiod of time.7063549-Barrel-water-pump-Ma-1712-14.indb 6 11/04/2019 12:28 |
Related manuals for Batavia MAXX Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine