Beamz 152.780 Instruction Manual

Contents

Rigging the Fixture The installation of the fixture has to be built and constructed in a way that it canhold 10 times the weight for 1 hour without any harming deformation. The installation must always be secured with a secondary safety attachment, e.g.an appropriate catch net. This secondary safety attachment must be constructedin a way that no part of the installation can fall down if the main attachment fails. Make sure the area below the installation place is free from unwanted personsduring rigging, de-rigging and servicing. The operator has to make sure that safety-relating and machine-technicalinstallations are approved by an expert before taking into operation for the firsttime and after changes before taking into operation another time. The operator has to make sure that safety-relating and machine-technicalinstallations are approved by a skilled person once a year. The fixture should be installed in the position where persons cannot reach andwhere persons may walk by or be seated.CAUTION: Use of controls, adjustments, or performanceof procedures other than what is specifiedherein may result in hazardous radiationexposureCAUTION: Please consider the respective national norms duringthe installation! The installation must only be carried outby an authorized employee or dealers!