Beamz IP65 Outdoor Multipoint RG 3W RGB LED Instruction Manual

3ENGLISHCongratulations to the purchase of this Beamz product. Please read this manual thoroughly prior to using the product in order tobenefit fully from all features.Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautionsto avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.Keep the manual for future reference.- Prior to using the product, please ask advice from aspecialist. When the unit is switched on for the first time,some smell may occur. This is normal and will disappearafter a while.- The unit contains voltage carrying parts. Therefore doNOT open the housing.- Do not place metal objects or pour liquids into theproduct. This may cause electrical shock andmalfunction.- Do not place the product near heat sources such asradiators, etc. Do not place the unit on a vibratingsurface. Do not cover the ventilation holes.- The product is not suitable for continuous use.- Be careful with the mains lead and do not damage it. Afaulty or damaged mains lead can cause electrical shockand malfunction.- When unplugging the product from a mains outlet,always pull the plug, never the lead.- Do not plug or unplug the unit with wet hands.- If the plug and/or the mains lead are damaged, theyneed to be replaced by a qualified technician.- If the product is damaged to such an extent that internalparts are visible, do NOT plug the unit into a mains outletand DO NOT switch the product on. Contact your dealer.Do NOT connect the product to a rheostat or dimmer.- To avoid fire and shock hazard, do not expose theproduct to rain and moisture.- All repairs should be carried out by a qualified technicianonly.- Connect the product to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.- During a thunderstorm or if the product will not be usedfor a longer period of time, unplug it from the mains. Therule is: Unplug it from the mains when not in use.- If the product has not been used for a longer period oftime, condensation may occur. Let the unit reach roomtemperature before you switch it on.- During operation, the housing becomes very hot. Do nottouch it during operation and immediately after.- To prevent accidents in companies, you must follow theapplicable guide lines and follow the instructions.- Secure the product with an extra safety chain if the unit isceiling mount. Use a truss system with clamps. Makesure nobody stands in the mounting area. Mount theeffect at least 50cm away from inflammable material andleave at least 1 meter space on every side to ensuresufficient cooling.- This poduct contains high intensity LEDs. Do not lookinto the LED light to prevent damage to your eyes.- Do not repeatedly switch the product on and off. Thisshortens the life time.- Keep the unit out of the reach of children. Do not leavethe unit unattended.- Do not use cleaning sprays to clean switches. Theresidues of these sprays cause deposits of dust andgrease. In case of malfunction, always seek advice froma specialist.- Only operate the product with clean hands.- Do not force the controls.- If the product has fallen, always have it checked by aqualified technician before you switch the product onagain.- Do not use chemicals to clean the unit. They damage thevarnish. Only clean the product with a dry cloth.- Keep away from electronic equipment that may causeinterference.- Only use original spares for repairs, otherwise seriousdamage and/or dangerous radiation may occur.- Switch the product off prior to unplugging it from themains and/or other equipment. Unplug all leads andcables prior to moving the product.- Make sure that the mains lead cannot be damaged whenpeople walk on it. Check the mains lead before every usefor damages and faults!- The mains voltage is 220-240Vac/50Hz. Check if poweroutlet match. If you travel, make sure that the mainsvoltage of the country is suitable for this product.- Keep the original packing material so that you cantransport the product in safe conditionsThis mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficientmagnitude to cause a shock hazard.This mark attracts the attention of the user to important instructions that are contained in the manual and that he shouldread and adhere to.DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epilepticattacks should be aware of the effects that this light effect may have on them.The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificateand their guarantee!NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and35°C/95°F.Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or yourdealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.Specifications can be changed without prior notice.prior notice.Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would alsoinvalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of thewarnings contained in this manual. Beamz cannot be held responsible for personal injuries caused by a disrespect of the safetyrecommendations and warnings. This is also applicable to all damages in whatever form.