Beamz LED PAR 4X 8W Quad Linkable Manual Manual

Contents

- 4 -SAFETY INSTRUCTIONS Always connect this product to a grounded circuit to avoid the risk of electrocution. Never put tiny metal objects such as a screwdriver, iron wire, etc. into this product in case of ashort circuit . Please make sure that the voltage of the outlet to which you are connecting this product iswithin the range stated on the decal or rear panel of the product. Avoid physical damage to the product during transportation. Never carry this product from thepower cord or any moving part . Always use the hanging / mounting bracket or the handles. This product is for indoor use only. To avoid risk of fire or shock, do not expose this product torain or moisture. Never pull or tug on the cord and change it for another one, stop using it when it is damagedor becomes hot . Stop using the product once there are sparks when connecting it to the power socket. Do not operate this product with wet hands and never place it near water or any other liquids. Make sure there are no flammable materials close to the unit while operating. Always install itin a location with adequate ventilation. When the original lightning source is damaged, do not replace it with a lightning source whichhas different specifications and ratings. Always disconnect this product from the power source before replacing the light source or thefuse. The maximum ambient temperature is 40°C(104°F). Never clean the unit with water, thinner or any other dissolving agent . Stop using the product in case of a serious operating problem and send it to our maintenanceagent immediately. Never get this product repaired by non-professional workers. Avoid direct eye exposure to the light source while this product is on.SPECIFICATIONLight intensity Lms: R=900, G=1620, B=360, W=1800 with mains supplyNo. of LEDs 12x 8W Quad LEDsDMX channels 1-4-8IP Rating IP65Power Supply 220-240Vac / 50HzConsumption 115WDimensions 398 x 220 x 289mmWeight 17.5kg