5Machine Description GBTechnical Data GB1. Throttle lever.2. Recoil Starter Handle.3. Fuel Tank.4. Lifting Point.5. Handle Release Catch.6. Forward / Reverse Control Handle.7. Main Handle.8. Belt Guard.9. Key Start* Minimum level to En500 Part 4Environment GBSafe Disposal.Instructions for the protection of the environment. Themachine contains valuable materials. Take thediscarded apparatus and accessories to the relevantrecycling facilities.Reasons For Compaction GBSoil, which has been disturbed or new infill, subbase and blacktop, will have small voids or air pockets which, if not compacted, willlead to one or more problems occurring.1. As traffic crosses the surface of an uncompacted area, the material is compressed. This leads to subsidence of the top surfaceas the material fills the voids.2. A similar situation occurs with static loads on uncompacted ground. The load (e.g. a building) will sink.3. Materials with voids are more susceptible to water seepage, leading to erosion. Water ingress may also cause the soil toexpand during freezing temperatures and contract during dry spells. Expansion and contraction is a major cause of damage tobuilding foundations and normally leads to the structure requiring underpinning.Compaction increases the density of the material and therefore increases its load bearing capacity. Reduces air voids and thereforereduces the risk of subsidence, expansion and contraction, due to ingress of water.45060083912755 18762349Model 45/60Engine - Honda GX 270 Petrol (Hp) 9Engine - Hatz 1B30Diesel (Hp) 6.3Weight - Honda GX 270 Petrol (Kg) 282Weight - Hatz 1B30 Diesel (Kg) 290Engine RPM - Honda 3600Engine RPM - Hatz 3000Centrifugal Force (kN) 45Frequency - Honda (Hz) 70Frequency - Hatz (Hz) 70Maximum Travel Speed (m/min) > 24Sound Power (dB(A)) 107Component MaterialHandle SteelFront cover HDPEMain frame SteelBaseplate SteelHand Grips Polyurethane FoamEngine AluminiumFlexible Mounts Steel and RubberVarious Parts Steel and Aluminium