CAB A4+M Operator's Manual
Also see for A4+M: User configuration guide
                            | |
Contents
| 
14 144 Loading Material4.2 Loading Fanfold Labels1 2 3 4 56 7Fig. 10 Loading fanfold labels1. Position label stack (5) behind the printer.2. Turn ring (4) counterclockwise, so that the arrow points to the symbol , and thus release the margin stop (3).Leave the margin stop on the roll retainer (7).3. Push the inner margin stop (2) against the chassis (1) until it stops. Thus the other margin stop (3) will be movedoutwards.4. Push label strip between the margin stops (2,3) to print unit via the roll retainer (7). Ensure that the labels on thestrip are visible from above.5. Push the outer margin stop (3) until both margin stops (2, 3) touch the label strip (6) without clamping or bendingit.6. Turn ring (4) clockwise, so that the arrow points to the symbol , and thus fix the margin stop (3) on the rollretainer.7. Insert label strip into printhead ( 4.1.2 on page 13).8. Set label sensor ( 4.1.3 on page 13). |
Related manuals for CAB A4+M
manualsdatabase
Your AI-powered manual search engine