CAB A+ Operator's Manual
Also see for A+: Programming manual
                                    | |
Contents
| 
22 224 Loading Material4.7 Removing and Installing the Rewind Guide Plate, Dispense Plate or Tear-off PlateTo convert the printer for use in another operating mode, a rewind guide plate, a dispense plate or a tear-off platemay need to be installed.! Attention!For printer versions with a locking system on the rewind assist roller, the locking system must be removedfor operation in rewind mode before installation of the rewind guide plate ( 4.8 on page 23).22 1Fig. 16 Removing and installing the rewind guide plate, dispense plate or tear-off plateRemoving a plate1. Loosen screws (2) several turns.2. Slide plate (1) to the right and remove it.Installing a plate1. Place plate (1) onto the screws (2) and slide to the left completely.2. Tighten screws (2). |
Related manuals for CAB A+
manualsdatabase
Your AI-powered manual search engine