CAB EOS2 Operator's Manual
Also see for EOS2: Service manualConfiguration manualOperator's manual
                            | |
Contents
| 
154.4 Setting the Feed Path of the Transfer RibbonTransfer ribbon wrinkling can lead to print image errors. The transfer ribbon deflection (2) can be adjusted so as toprevent wrinkles.1 2Figure 14 Setting the feed path of the transfer ribboni Note!The adjustment is best carried out during printing. Turn screw (1) with torx wrench TX10 and observe the behavior of the ribbon.• By turning it clockwise the outer edge of the transfer ribbon is tightened.• By turning it counterclockwise the inner edge of the transfer ribbon is tightened.4 Loading Material |
Related manuals for CAB EOS2
manualsdatabase
Your AI-powered manual search engine