CAB HERMES Q2L Assembly Instructions Manual

Also see for HERMES Q Series: Configuration manual Service manual

CAB HERMES Q2L Assembly Instructions Manual Manual pdf 10 page image

10 102 Installation2.2 Unpacking and Setting-up the Printer Lift the printer out of the box. Check printer for damage which may have occurred during transport. Remove foam transportation safeguards near the printhead. Check delivery for completeness.Contents of delivery:• Printer• Power cable• USB cable• Assembly instructions• DVD with label software, Windows driver and documentationi Note!Please keep the original packaging in case the printer must be returned.! Attention!The device and printing materials will be damaged by moisture and wetness. Set up printers only in dry locations protected from splash water.• Fixing at four M6x10 drillings on the bottom side of the chassis Orientation upright standing only• Fixing via bracket at each two M6 drillings on both sides of thechassis Orientation vertically, turnable by 360 degrees• Fixing via bracket at each two M6 drillings on both sides of thechassis Orientation horizontally, with operator's side upTable 1 Permitted mounting orientations