CAB SQUIX Operator's Manual

Also see for SQUIX: Service manual Configuration manual Instructions

CAB SQUIX Operator's Manual Manual pdf 27 page image

277 Fault Correction7.1 Error DisplayThe appearance of an error will be shown on the display:Figure 24 Error displayThe error treatment is pending on the error type  7.2 on page 27.The display offers the following possibilities to continue after an error occurred:Repeat The print job will be continued after clearing the error cause.Cancel The print job will be cancelled.Feed The paper feed will be synchronized. Following the print job can be continued.Ignore The error message will be ignored. The print job will be continued possibly with limitedperformance.Save log The error does not allow print operation.For detailed analysis several system files can be saved on an external memory.Table 5 Button in the error display7.2 Error Messages and Fault CorrectionError message Cause RemedyBarcode error Invalid barcode content, e.g. alphanumericcharacters in a numerical barcodeCorrect the barcode content.Barcode too big The barcode is too big for the allocatedarea of the labelReduce the size of the barcode or move it.Buffer overflow The input buffer memory is full and thecomputer is still transmitting data.Use data transmission via protocol (preferablyRTS/CTS).Cutter blocked Cutter cannot return into its home positionand stays in an undefined positionSwitch off the printer. Remove material. Switch onthe printer. Restart print job.Change materialNo cutter function Switch the printer off and then on.If error recurs call service.Cutter jammed The cutter is unable to cut the labels but isable to return into its home positionPress CancelChange material.Device not conn. Programming addresses a non-existentdeviceEither connect this device or correct theprogramming.File not found Requested file is not on the card Check the contents of the card.Font not found Error with the selected download font Cancel current print job, change font.Memory overflow Current print job contains too much infor-mation, e.g. selected font, large graphicsCancel current print job.Reduce amount of data to be printed.Name exists Duplicate usage of field name in the directprogrammingCorrect programming