CABASSE iO System Owner's Manual
Also see for Furio: Operating instructions
            | |
Configuration 5.1 without the Max■ 5 iO speakers + 1 Furio subwoofer or 2 mainspeakers + 3 iO speakers + 1 Furio subwooferConnect each speaker output of the 5.1 amplifier directly to thematching iO speaker (front right, front left, centre, etc.).Connect the subwoofer CINCH RCA output of the amplifier toone CINCH RCA LINE IN post of the subwoofer.Then adjusts the set-up menu of your audio video amplifier:For 5 iO speakers:For 3 iO speakers and 2 large bandwidth front speakers:FURIO SUBWOOFER ADJUSTMENTSIn any cases configuration 2.1 or configuration5.1, the adjustment of frequencies CROSSOVERFREQUENCY is positioned as follows:The adjustment of the LEVEL will depend uponroom positioning, type of amplifier, etc. With theFurio subwoofer, the average position of the LEVELcontrol is as follows:For an optimum adjustment of this level, we advise you to car-ry it out starting from a stereo source (CD).To adjust the level of the low frequency effect channel, do notmodify the sound level of the Furio subwoofer but go into theset-up menu of your audio video amplifier 5.1 and adjust theSUBWOOFER / LFE channel.e n g l i s hBecause of technical improvements already under way in our constant search for optimum quality, Cabasse reserves the right to modify all the modelspresented in specification sheets, advertising materials and manuals without prior notice.Our web site www.cabasse.com will give you the specific adjustments we recommend for the use of our active subwoofers.Installation 2/7 channels caisson de graves actifWays 2 1Drivers tweeter-midrange 2 ways coaxial modèle 21M18LB4C - 21 cmDOM25/13F15Crossover frequency DOM25/13F15 à 2 700 HzFrequency bandwith 180 - 20 000 Hz 30 - 200 Hzin semi-reverberating chamber in semi-reverberating chamberPulsed sound pressure 114 dBEfficiency 93 dB/2,8 v/1 mHigh-pass filter 180 HzNominal impedance 8 ohmsMinimum impedance 3,2 ohms actifPower handling 80 W 250 WPeak power handling 560 W 750 WLowpass cut-off frequency from 40 to 180 HzPhase switch 0 ° normal, 180 ° reverseInput 2 low level, 2 high levelMagnetic shielding yes -Max Cabasse module included yesVoltage 115/230 V, AC - 50/60 HzMaximum power consumption 165 WDiameter of the sphere 16 cm - 6.3 iniO base version dimensions (h x w x d) 19 x 16 x 20 cm - 7.5 x 6.5 x 8 in 37 x 26 x 37 cm - 20 x 13 x 17 inweight 2 kg - 4.9 lb 18 kg - 40 lbiO stand version dimensions (h x w x d) 105 x 30 x 30 cm - 41.5 x 12 x 12 inweight 10 kg - 21 lbiO in ceiling dimensions (h x w x d) 26 cm de diamètreweight 2 kg - 4.9 lbSPECIFICATIONS iO SPEAKER SUBWOOFER FURIOTECHNICAL DATAFRONT SMALLCENTER SMALLSURROUND SMALLSUBWOOFER STEREO YESSUBWOOFER / LFE YESSUBWOOFER FREQUENCY 180 HzFRONT LARGECENTER SMALLSURROUND SMALLSUBWOOFER STEREO NOSUBWOOFER / LFE YESSUBWOOFER FREQUENCY 180 Hz |
Related manuals for CABASSE Furio
manualsdatabase
Your AI-powered manual search engine