CAME F1000 Installation Manual

Also see for F1000: Installation manual STANDARD INSTALLATION Manaul STANDARD INSTALLATION Installation manual

Contents

p. 3 - Manual FA00679-EN v. 1- 12/2017 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.GENERAL INSTALLATION INDICATIONSOnly skilled, qualified staff must install this product.Warning! Before working on the control panel, cut off the main power supply and, if present, remove anybatteries.Preliminary checksBefore installing the control panel, do the following:• make sure the fastening points and the anchoring surface are solid and protected from impacts. Only usesuitable nuts, bolts, dowels, and so on;• set up a suitable dual pole cut off device along the power supply that is compliant with the installation rules. Itshould completely cut off the power supply according to category III surcharge conditions;• make sure that any connections inside the container (ones that ensure continuity to the protection circuit) arefi tted with additional insulation with respect to those of other electrical parts inside:• set up suitable tubes and conduits for the electric cables to pass through, making sure they are protected fromany mechanical damage.Description of partsTransformerLine fusePower supply terminalsTransformer terminal boardsControl-board fuseTerminals for control and safety devicesAlert LEDAntenna terminalDIP-SWITCHAF card connectorAutomatic closing trimmerOperating time trimmerMotor 2 delay trimmerProgramming keyAccessories fuseTerminal board for microswitches