CAMPAGNOLO Neutron Owner's Manual

Also see for Neutron: Owner's manual

Contents

CAMPAGNOLO Neutron Owner's Manual Manual pdf 27 page image

4ENGLISH2• The wheel you have purchased is designed to use clincher tires.• Before fitting the tires, cover the rim using only the tape (part no. WH-RT02) supplied with the rim.• Before fitting the tires, check that the diameter indicated on the tire is 622 and cross-section is between 18 and 25 mm, to insure that the tire and wheelare compatible in accordance with ETRTO (European Tire and Rim Technical Organization) standards.WARNING!Failure to properly install the tire can cause sudden and unexpected loss of tire pressure, resulting in an accident, personal injury or death.INSTALLING CLINCHER TIRESBe sure that you do not damage or otherwise bend any portion of the rim wheninstalling the tire.• Insert one side of the clincher into the seat provided on the rim (Fig. 2).• Slightly inflate the inner tube to facilitate assembly.• Insert the valve through the hole in the rim, and then position the remainderof the inner tube between the rim and the clincher tire.• Insert the second side of the clincher tire into its seat in the rim.3. TIRES