CASCADEMIC CS-STPR Series User Manual
                                  | |
4.6. TO CHANGE BAUD RATE:[Command] : $1D44[Range] : 2400 to 230400. Default baud rate is 9600[Description] : Sets the baud rate for data communication.[Notes] : Once new baud rate is set, similar configuration has to be made inHyper Terminal.E.g. To configure baud rate 57600 (use command $1D44 57600)4.7. PRINT FEED N LINES:[Command] : $14$0$n[Range] : 00 ≤ n ≤ 99 (n in millimeter)[Description] : Prints data and feed “n” millimeter line spacing.[Notes] : This command is used to feed a specific line without changing the line spacingset by other commands.4.8. PRINT REVERSE FEED N LINES:[Command] : $14$1$n[Range] : 00 ≤ n ≤ 99 (n in millimeter)[Description] : Prints data and feed “n” millimeter line spacing in reverse direction.[Notes] : This command is used to feed a specific line without changing the line spacingset by other commands.Sample TextABCDEFGHIJKLMNOPQRSTUVWX$14$0$08 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine