CCW Tha Misfit User Manual
                                         | |
17MAINTENANCEINSPECTION AND MAINTENANCE SCHEDULEIt is very important to inspect and maintain your motorcycle regularly. Follow the guidelines in the chart below. Theintervals between periodic services in months are shown. At the end of each interval, be sure to perform and documentthe maintenance listed. Only an authorized Cleveland CycleWerks service center may maintain, replace, or repair emissioncontrol devices and systems.WARNING:Failing to perform recommended maintenance or performing maintenance improperly can lead to an accident and causeserious personal injury, cause noncompliance to emissions regulations, and may void your warranty. If you are not surehow to perform the maintenance items below, contact your CCW authorized service center or Cleveland CycleWerks.Item Weekly Monthly Quarterly YearlyFuel Lines I L IAir Cleaner * C C I IThrottle Controls * I A I ASpark Plug C I RValve Clearance * I I IEngine Lubricant *Gearbox Lubricant *During run-in period, replace every 150 miles.After run-in period, replace every 600 miles.Engine Lubricant *Filter Screen C C I ICarburetor C C C CDrive Chain * I A LBattery * IBrake Shoe IBrake System * I IElectric Parts IBolts, Nuts, Fasteners * I L IGear in Gearbox I IFuel Tank I ITire Pressure Wear * ISteering System * AChassis * L II = Inspect and clean, adjust, lubricate, or replace as necessaryC = Clean R = Replace L = Lubricate A= Adjust* 1st Scheduled maintenance is crucial to the longevity of your motor. 1st scheduled maintenance should be performed between150-‐500 miles. This maintenance should include the following items:1. Visual and performance inspection of: Air cleaner, throttle controls, brake system, all bolts and fasteners, tire pressure and wearpattern, steering system’s proper operation and actuation, chassis inspection.2. Oil should be changed with approved SAE standard Oil listed in this manual, Oil Filter removed, cleaned and inspected.3. Valve clearance should be checked to make sure it is within proper manufacturer specification. Valve clearance is typicallyacceptable at 0.04 0.06mm intake and 0.05 0.06mm exhaust. Please have all maintenance performed by authorized service center.Tampering with your motorcycle may void applicable warranty. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine