Cabletron Systems 7C04 Workgroup SmartSWITCH User Manual

Also see for 7C04 Workgroup SmartSWITCH: User guide

Contents

2-4Installation2.2.2 Mounting the 7C04 ChassisTo mount the 7C04 Chassis in a standard 19-inch equipment rack,(Figure 2-2) use the following steps:1. Slide the chassis into the equipment rack.2. Align the holes on the chassis’ mounting brackets with theholes on the equipment rack.3. Insert screws (provided with the equipment rack) into thedesired holes of the mounting brackets.4. Use a screwdriver to tighten each screw until the chassis issecured to the equipment rack.Figure 2-2. A 7C04 Chassis mounted in an equipment rackSNMAC ADRSN SNSN1234POWER INPOWER OUTOVERLOADFANSEquipment RackMounting BracketPower Supply ModuleMounting Bracket