Cabletron Systems 9E106-06 Reference Manual

Also see for SmartSwitch 9000: Appendix Appendix Appendix User guide Appendix

Contents

Cabletron Systems 9E106-06 Reference Manual Manual pdf 9 page image

79E106-06 Module Specific InformationPort Redirect Function ScreenThe 9E106-06 Port Redirect Function Screen (Figure 2),, allows you to set each oneof the ports as a source or destination port. You can set a port to have one or moredestination ports. For example, you can set port 1 as a source port with threedestinations: ports 2, 3, and 4. Traffic from port 1 is then automatically redirectedto ports 2, 3, and 4. Port 1 can also serve as a destination port for other ports.There can be more than one Port Redirect Function screen depending on thenumber of port redirect entries. Each screen displays up to 10 port redirect entries.If there is more than one screen of redirect entries, the NEXT and/or PREVIOUScommand is displayed at the bottom of the screen, allowing you to navigate toeither the next or previous screen.For example, with three screens of entries, the NEXT command displays at thebottom of the first screen. In the second screen, the NEXT and PREVIOUScommands are displayed. In the last screen, only the PREVIOUS command isdisplayed.Figure 2. 9E106-06 Port Redirect Function ScreenSmartSwitch 9000 LOCAL MANAGEMENTPort Redirect FunctionModule Name: 9E106-06 Firmware Revision: 2.00.03Slot Number: 5 BOOTPROM Revision: 01.02.02Source Port Destination Port-- ---- ---- ---- ---- ---- ---- ---- ---- ---- --Source Port [ 1] Destination Port [ 1] Status [ADD]SAVE RETURN

/ 12

Related manuals for Cabletron Systems SmartSwitch 9000