Cabletron Systems ESX-1320 Installation Manual

Also see for ESX-1320: Management guide

Cabletron Systems ESX-1320 Installation Manual Manual pdf 51 page image

Using the LCDESX-1320/ESX-1380 Installation Guide4-114.4.3 Alarm MessagesAlarm Messages pertain to events that occur within the ESX regardingport status. The messages that can be displayed are shown in Table 4-4.To Display the MessagesThere are two ways to gain access and display the Alarm Messages:• From the product name displayPress and hold the DISPLAY button for 3 seconds while the productname (e.g., CABLETRON ESX-1320) is displayed. When the buttonis released, the display steps to the first of the saved Alarm Messagesdescribed in Table 4-4. Thereafter, each time you press the DISPLAYbutton, the next message is displayed.• From a Static System Message displayPress and hold the DISPLAY button for 3 seconds while a StaticSystem Message is displayed. When the button is released, the displaysteps to the saved Alarm Messages described in Table 4-4. Thereafter,each time you press the DISPLAY button, the next saved message isdisplayed.To ExitThere are two ways to exit the Static System Messages:• Automatic 20-second exitAllowing 20 seconds to elapse after the last DISPLAY buttonoperation. The display returns to the product name.• Jump to saved System MessagesPress and hold the DISPLAY button for 3 seconds. When the button isreleased, the display steps to the saved System Messages described inSection 4.4.4.NOTEWhether you are displaying Static System Messages, AlarmSystem Messages, or Saved System Messages, the displayreturns to the product name display 20 seconds after the lastoperation of the DISPLAY button.