Cabletron Systems FN100 Reference Manual

Also see for FAST NETWORK 100: Quick setup guide User guide

Cabletron Systems FN100 Reference Manual Manual pdf 25 page image

IP GroupFast Network 100 MIB Reference GuidePage 2-9ipFragFails {ip 18}Counter Read-OnlyThe number of IP datagrams that have been discarded because they needed to befragmented but could not be (e.g. because their “Don’t Fragment” flag was set).ipFragCreates {ip 19}Counter Read-OnlyThe number of IP datagram fragments that have been generated by this FN100.2.4.1 IP Address TableThe TCP/IP IP Address Table contains the IP addressing information for eachport. The parameters are described below.ipAddrTable {ip 20}Not-AccessibleA list of IP address entries; one per IP address. If a port has not yet learned its IPaddress, then an ipAddrEntry might not exist for the port (i.e., having anipAddrEntry with an IP address of zero is not acceptable).ipAddrEntry {ipAddrTable 1}Not-AccessibleA set of objects for an ipAddrTable entry. The individual components aredescribed below.ipAdEntAddr {ipAddrEntry 1}IP Address Read-OnlyThe IP address itself. Although this field is Read-Only, the FN100’s sfifIPAddrparameter can be written to affect changes.ipAdEntIfIndex {ipAddrEntry 2}Integer Read-OnlyThe port number that has the indicated IP address.ipAdEntNetMask {ipAddrEntry 3}IP Address Read-Write4The network/subnet mask associated with the IP address. For SetRequests, amask of zero may be specified, in which case, the FN100 will create the correct4. The standard MIB definition is Read-Only.