Using LCM to Check FN10 StatusFast Network 10 User GuidePage 4-13LCM would display:LCM allows you to display MAC addresses in two formats:• Little-endian (default)Little-endian is a method of storing or transmitting data in which theleast significant bit of each byte is presented first. This is used inEthernet networks.• Big-endianBig-endian is a method of storing or transmitting data in which themost significant bit of each byte is presented first. Use the big optionto display MAC addresses in big-endian format.Big-endian format separates the bytes with spaces rather than colons.You can also enter MAC addresses in big-endian format by usingspaces rather than colons. This option is helpful if your networkincludes Token Ring or FDDI along with Ethernet.The ipaddr command displays the IP addresses, subnet masks, and MACaddresses of all FN10 ports. At the LCM prompt:1. Type ipaddrLCM displays the current IP address table, for example.Address Type Port Age(secs) Frames-From Frames-To02:04:06:03:2a:4302:04:06:00:2a:6702:04:06:a3:70:2bLearnedLearnedLearned54621101181342115339730235Enter to continue, Ctrl-C to exit:IP Address Address Mask MAC Address12345678192.138.217.10.0.0.0192.138.217.100.0.0.00.0.0.0192.138.217.20192.138.217.50192.138.217.30255.255.255.0255.0.0.0255.255.255.0255.0.0.0255.0.0.0255.255.255.0255.255.255.0255.255.255.000:40:27:00:06:1f00:40:27:00:06:c300:40:27:00:06:3e00:40:27:00:03:7a00:40:27:00:05:c700:40:27:00:04:4a00:40:27:00:06:9e00:40:27:00:04:b4Port
