Cabletron Systems MMAC-Plus 9E312-12 User Manual
Also see for MMAC-Plus 9E312-12: Appendix
                             | |
Installing the 9E312-12 Module2-6Setting the 9E312-12 Module DIP SwitchThe DIP switch on the 9E312-12 Module (Figure 2-4 and Figure 2-4), is an eightswitch DIP located on the top left corner of the module. Each switch is setaccording to the functions described in Table 2-2.If switch settings are changed, the processor on the module must be reset by usingthe reset switch or repowering the module for the changes to take effect.Figure 2-5. 9E312-12 Module DIP Switch location12345678i 960SMB 1PromBOOTPROM |
Related manuals for Cabletron Systems MMAC-Plus 9E312-12
Cabletron Systems MMAC-Plus 9EX02-12 User Manual
Cabletron Systems MMAC-Plus 9H421-12 User Manual
Cabletron Systems MMAC-Plus 9A000 User Manual
Cabletron Systems MMAC-Plus 9H531-18 User Manual
Cabletron Systems MMAC-Plus 9H531-18 User Manual
Cabletron Systems MMAC-Plus 9E423-24 User Manual
Cabletron Systems MMAC-Plus 9H423-26 User Manual
Cabletron Systems MMAC-Plus 9H531-24 User Manual
Cabletron Systems MMAC-Plus 9T122-24 User Manual
Cabletron Systems MMAC-Plus 9G426-02 User Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine