Cabletron Systems SmartSTACK 10 ELS10-26 Getting Started

Also see for SmartSTACK 10 ELS10-26: User guide Reference guide

Contents

– 2 –Setting Up and Powering Up theELS10-26Setting up and powering up your ELS10-26 is a simple processthat requires you to:• attach the power cord and connect to a power source• check power-up diagnostics sequenceAttaching Power Cord and Connecting to a PowerSourceA power cord is provided with the ELS10-26. Attach the powercord to the power cord connector on the back of the ELS10-26.The ELS10-26 is not equipped with an on/off switch. To power-upthe unit, connect the power cord to a 120 VAC or 240 VAC single-phase stress grounded outlet.Checking the Power-up Diagnostics SequenceBefore connecting any devices to the ELS10-26, power on the unitand observe the power-up diagnostics sequence to check forproper operation.To observe the power-up diagnostics sequence completely, youmay want to repeat it. To restart the power-up sequence press thereset switch on the front panel.When you power up the ELS10-26, the following occurs:1. All LEDs turn on for one second.2. The Power (Pwr) LED remains on.3. The CPU LED starts flashing.ELS10-26TXSTATUSPORT STATUS MODE10BASE-T/100BASE-TXFEPIM2X 4X 6X 8X 10X 12X 14X 16X 18X 20X 22X 24X MONX 26X27LINKSTATUSLINKSTATUS2627LINKSTATUSLINKSTATUSLINKSTATUSLINKSTATUSLINKSTATUSLINKSTATUS131415162324212217181920LINKSTATUSLINKSTATUSLINKSTATUSLINKSTATUSLINKSTATUSLINKSTATUS341278561112910TX ACT FDX MONRX COL 100 USRPWRCPURESET25MONCOMReset SwitchTHIS DEVICE COMLPIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTEFERENCE, AND(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.ELS10-26LISTED16EOITE MULTIPORTSWITCH UNITLINE:100-125V~1.0A200-240V~ 0.5A50/60HzUL® UL®C TUV RheinlandgaprOfteSicherheitSNNET.ADD.